BHEL Model Test Paper|Examination Tips|BHEL written Examination details 2009-2010

BHEL Written Examination Details & Sample Paper Are Given Below:

BHEL Invites applications fresher’s from Mechanical,Electrical,Electronics,Civil engineers, for 600 engineering Trainee and 600 Supervisor trainee posts.
Here is Question model for BHEL supervisor trainee of Written Test;
Written test will consists of 150 multiple choice objective type questions.Test is designed to assess the candidate’s Professional ( Technical) Knowledge of the chosen Engineering Discipline and Higher Aptitude covering arear like Quantitative Aptitude, Reasoning Ability, Logical thinking, English usage, General Awareness etc.
have to answer 150 questions in 2 hours .
For each question, a choice of few alternative answers will be given, out of which only one alternative is correct. You have to choose the alternative, you think to be correct and indicate your choice on the answer sheet.
Every question will carry 1 mark. Negative marking to the extent of 0.2 marks per wrong answer will be there

Written Test Paper Details:

1.    Written test will consists of 150 multiple choice objective type questions.Test is designed to assess the candidate’s Professional ( Technical) Knowledge of the chosen Engineering Discipline and Higher Aptitude covering arear like Quantitative Aptitude, Reasoning Ability, Logical thinking, English usage, General Awareness etc.

1.    Your performance in this written test will determine possibility of further considerations of your candidature.

3.    There is a specific time limit for answering each part. Candidate will have to answer 150 questions in 2 hours .

4.    For each question, a choice of few alternative answers will be given, out of which only one alternative is correct.you have to choose the alternative, you think to be correct and indicate your choice on the answer sheet.

5.    Your admission to this Test is, however, provisional. The candidates are advised to ensure while applying that they fulfill the eligibility criteria and other requirements and that the particulars furnished by them are correct in all respects for the post applied for. Mere appearance at the Test does not entail you to make any claim for the post. You will be treated as debarred ab-initio in case you do not fulfill the essential eligibility criteria.

6.    The Answer Sheet is a special OMR (Optical Mark Reader) sheet.

7.    Every question will carry 1 mark. Negative marking to the extent of 0.2 marks per wrong answer will be there.

8.    a) For answering the Test questions, there will be CIRCLES in the Answer Sheet. The chosen answer is to be indicated by darkening (encoding) one of the CIRCLE fully. Any other method of answering will be taken as incorrect answer.
     For Example, If 10x+6=106, then 15X -10 will be
.    (1) 100 (2)140 (3)110 (4)80 (5) None of the above
     Since correct answer is option (2), the CIRCLE 2 will have to be darkened (encoded) to fill the space completely like this:
     The following are not correct methods of marking:
     d) Change / Cutting / Overwriting / Erasing of CIRCLES is NOT permitted.
     c) Make marks only in the CIRCLES provided. Please do not make any stray marks on the answer sheet. This will be penalised.
     d) Rough work must not be done on the Answer sheet. This will be penalised. You can use the Test Booklet for this purpose.

 

BHEL Invites applications freshers from Mechanical,Electrical,Electronics,Civil engineers, for 600 engineering Trainee and 600 Supervisor trainee posts.
Here is Question model for bhel supervisor trainee of Written Test;
Written test will consists of 150 multiple choice objective type questions.Test is designed to assess the candidate’s Professional ( Technical) Knowledge of the chosen Engineering Discipline and Higher Aptitude covering arear like Quantitative Aptitude, Reasoning Ability, Logical thinking, English usage, General Awareness etc.
have to answer 150 questions in 2 hours .
For each question, a choice of few alternative answers will be given, out of which only one alternative is correct. You have to choose the alternative, you think to be correct and indicate your choice on the answer sheet.
Every question will carry 1 mark. Negative marking to the extent of 0.2 marks per wrong answer will be there.

SAMPLE TEST QUESTION


1. APTITUDE TEST Directions: In the following question, pick the choice whose meaning is opposite to the word shown in capitals.
1.    HOI POLLOI:
     (1) Cannibalism (2) Tyranny (3) The past (4) Aristocracy (5) Capitalist
2.    Which of the following numbers is least?
     (1) (1/4)2 (2) 49 (3) 4-9 (4) 42
3.    It costs Rs.4.25 for two adults and their child to attend the Circus. If the child’s ticket is half the price of adult’s ticket, what is the price of an adult’s ticket?
     (1) Rs.0.75 (2)Rs. 1.70 (3) Rs.1.75 (4) Rs.1.44
4.    If `a’ is less than 50 and ‘b’ is less than 25, it follows that:
     (1) a=2b (2) `a` is greater than b (3) a+b is less than 75 (4) a-b =25 (5) None of these

 

2. TECHNICAL TEST (for Supervisor Trainees)
CIVIL ENGINEERING
1.    When a rectangular beam is loaded transversely, the maximum tensile stress is developed on the
     (1) top layer
(2) bottom layer
(3) neutral axis
(4) every cross section
(5) none of these
2.    The velocity at which the laminar flow stops, is known as
     (1) velocity of approach
(2) lower critical velocity
(3) higher critical velocity
(4) medium critical velocity
(5) none of these

ELECTRICAL ENGINEERING
1.    ) If a hot resistance of an indicator lamp is 50 Ohm and rated current is 0.2A, its rated voltage is
     (1) 2V (2) 5V (3) 10V (4) 20V (5) 25V
2.    What resistance must be connected in parallel with one of 8.5 ohm to give an equivalent resistance of 5.1 ohm?
     (1) 15.72 ohm (2) 12.75 ohm (3) 17.52 ohm (4) 15.27 ohm (5) None of these

ELECTRONICS ENGINEERING
1.    A reflex Klystron function as:
     (1) Microwave amplifier (2) Microwave oscillator (3) A high gain cavity (4) both as amplifier and as oscillator (5) None of these
2.    Thermocouple instruments are also known as
     (1) R F instruments (2) PMMC instruments (3) Rectifier instruments (4) Digital instruments (5) None of these
MECHANICAL ENGINEERING
1.    Kelvin-Planck’s law deals with
     (1) conservation of work (2) conservation of heat (3) conversion of heat into work (4) conversion of work into heat (5) none of these
2.    ) In involute gears, the pressure angle
     (1) dependent on the size of teeth (2) dependent on the size of gears (3) always constant (4) always variable (5) none of these

ANSWER KEY <
br />
1. APTITUDE TEST
     1(4) 2.(3) 3.(2) 4.(3)
2. TECHNICAL TEST
1.    CIVIL ENGG. 1. (1) 2. (2)
2.    ELECTRICAL ENGG. 1. (3) 2. (2)
3.    ELECTRONICS ENGG. 1. (2) 2. (3)
4.    MECHANICAL ENGG. 1. (3) 2. (3)

5 Comments

  • kaleem khan
    January 18, 2010 - 6:52 pm | Permalink

    these is very good question for getting knowledge please send me more questions i want to do pass bhel exams.

  • prabakaran
    March 22, 2010 - 11:18 am | Permalink

    hai

  • anand prakash
    October 7, 2010 - 9:49 am | Permalink

    i have lot of tipss for various competative exam i want to share .

    but i dont have the old question for bhel supervisory exam . plz send me soon . my exam on 24th oct

  • ilamaran
    September 12, 2011 - 10:26 am | Permalink

    i want instrument mechanic model question paper for bhel exam please send me sir

  • saravanan
    September 21, 2011 - 12:25 pm | Permalink

    prevoius question paper bhel supervisor trainee

  • Leave a Reply

    Your email address will not be published. Required fields are marked *

    You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>